<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

LiFePO4/CNT復合材料的制備及電化學性能

Synthesis and electrochemical performances of LiFePO4/CNT composite materials

  • 摘要: 采用溶膠凝膠-微波法制備LiFePO4/碳納米管(CNT)復合正極材料.考察不同微波時間和CNT含量對其電化學性能的影響,并通過X射線衍射(XRD)和掃描電子顯微鏡(SEM)對樣品的晶型結構和表面形貌進行表征.結果表明:摻CNT量為2%(質量分數)和微波18 min所得樣品有較好的電化學性能;0.1C充放電的首次放電比容量為142 mAh·g-1,第10次循環的比容量為136 mAh·g-1.

     

    Abstract: LiFePO4/carbon nanotube (CNT) composite cathode materials were synthesized by a sol-gel-microwave method. The effects of microwave time and CNT content on the electrochemical properties of LiFePO4/CNT were studied and the crystal structure and surface morphology were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that the samples with better electrochemical performance are obtained when the CNT content in LiFePO4/CNT is 2% and the microwave time is 18 rain. When charge-discharge cycling at 0.1 C, the initial specific discharge capacity is 142 mAh·g-1 and the specific capacity at the 10th cycle is 136mAh·g-1.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com