<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

SPS方法制備銅/金剛石復合材料

Preparation of Cu/diamond composites by spark plasma sintering

  • 摘要: 采用放電等離子燒結(SPS)方法制備出高體積分數的銅/金剛石復合材料,并對復合材料的致密度、熱導率和熱膨脹系數等進行了研究.結果表明,采用該方法制備的銅/金剛石復合材料微觀組織均勻,致密度分布為94%~99%,最高熱導率為305W·(m·K)-1,熱膨脹系數與常見電子半導體材料相匹配,能夠滿足電子封裝材料的要求.

     

    Abstract: High volume fraction Cu/diamond composites were successfully prepared by spark plasma sintering (SPS). Their relative density, thermal conductivity and coefficient of thermal expansion (CTE) were investigated. It is found that the composites have a uniform microstructure, with the relative density from 94% to 99%, the highest thermal conductivity of 305 W· (m·K)-1, and the CTE matching with common electronic semiconductor materials. All these properties can meet the demands of electronic packaging materials.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com