<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

摻雜聚合物電解質膜性能

Properties of doping polymer electrolyte membranes

  • 摘要: 以型號為Kynar2801的PVDF-HFP (偏氟乙烯-六氟丙稀共聚物)為基質,制備了摻雜微米TiO2粉體的聚合物鋰離子電池用多孔電解質隔膜,并采用SEM、XRD、交流阻抗法以及充放電測試等測試手段研究分析該電解質膜的物理及電化學性能.實驗結果表明:摻入質量分數6.5%的微米TiO2聚合物電解質膜的室溫離子電導率為1.66×10-3S·cm-1,拉伸強度為2.78MPa;在以摻雜電解質膜為隔膜的鋰離子電池中,分別以28,70,140,280mA·g-1的電流密度放電時,正極材料LiCoO2的放電容量分別為140.6,127.48,120.25,99.17mAh·g-1.

     

    Abstract: A PVDF2801-based porous polymer electrolyte membrane doped TiO2 micron-particles for lithium ion batteries was prepared. The physical and electrochemical properties of this electrolyte were investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), AC impedance method and charge/discharge test. The results indicate that the ionic conductivity of the polymer electrolyte doped 6.5%-TiO2 micron-particles is 1.66×10-3 S· cm-1 at room temperature and the extended intensity is 2.78 MPa. In the battery used the above electrolyte, the discharge capacity of the LiCoO2 is 140.6 mAh· g-1 at 28mA·g-1, and 99.17mAh·g-1 at 280mA·g-1.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com