<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

BaO,B2O3對CaO基精煉渣熔化性能及脫硫能力的影響

Effect of BaO,B2O3 on the melting properties and desulphurization ability of an CaO-based refining slag

  • 摘要: 在CaO基精煉渣中加入BaO和B2O3進行改質,對改質后的精煉渣進行熔化性能和脫硫性能的實驗研究.結果表明,BaO可以降低精煉渣的熔點和粘度,有效地改善鋼-渣反應的動力學條件,同時增強精煉渣的脫硫能力,當BaO含量為15%~25%時,脫硫率穩定在90%以上;而B2O3對精煉渣的脫硫率無明顯影響,可取代CaF2作為助熔劑加入。

     

    Abstract: A desulphurization experiment was carried out by adding BaO and B2O3 to an CaO-based slag. The result shows that the addition of BaO can decrease the melting point and viscosity of the refining slag, improve effectively the dynamics condition of metal-slag reaction, and increase the desulphurization ability of the refining slag. When the BaO content is between 15% and 25%, the desulphurization rate is more than 90%. But the addition of B2O3 has little influence on the desulphurization rate, just can be added instead of CaF2 as a flux.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com