<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

LiF和CaF2助熔效果的研究

Research on the Fluxed Effect of LiF and B2O3

  • 摘要: 通過抗彎強度測試研究了LiF和CaF2對陶瓷結合劑性能的影響.結果表明在Al-Si-O系陶瓷結合劑中,CaF2的析晶現象明顯大于LiF.以LiF為助溶劑的陶瓷結合劑比用CaF2為助溶劑的陶瓷結合劑熔點低、粘接強度大.當以LiF為助熔劑時,可以用摩爾數比值(Al2O3+B2O3)/(R2O+RO+0.5LiF)判斷陶瓷結合劑自身的強度.

     

    Abstract: The effects of LiF and CaF2 in the vitreous bond have been studied by the measurement of bonding strength. The results show that, the trend of CaF2 crystallization from Al-Si-O system vitreous bond is more obvious than that of LiF. The melting-point of the bonds is lower and the bonding force is stronger when using LiF than CaF2 as flux. The mole ratio (Al2O3+B2O3)/(R2O+RO+0.5LiF) can be used as a criterion to confirm the self-strength of the vitreous bonds.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com