<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

鋅鋁尖晶石的研制

Synthesis of Zinc Aluminum Oxide Spinel

  • 摘要: 在不同的ZnO/Al2O3配比條件下,于1600℃左右合成了鋅鋁尖晶石及含鋅鋁尖晶石的陶瓷材料.在1200~1300℃的溫度下,測定了不同陶瓷材料與銅液之間的接觸角,結果表明ZnO的加入可以改善銅液對Al2O3的浸潤性.

     

    Abstract: ZnO-Al2O3 spinel and the spinel-containing ceramics have been synthesized by sintering, the mixture of zinc oxide and alumina fine powder in various molar rations under about 1600℃. The contact angles between copper melt and the sintered ceramic samples of different compositions have been measured at the temperatures of 1200℃ and 1300℃. It can be shown from the result that the addition of ZnO into Al2O3 improves the wettabriity of copper melt on Al2O3 ceramic.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com