<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

電化學法快速測定鐵水中的硅量

A New Electrochemical Sensor for Rapid Determination of Silicon Content in Carbon Saturated Iron

  • 摘要: 采用以ZrO2(MgO)固體電解質,配以一新輔助電極SiO2+CaF2的方法,對Fe+C(sat)+Si體系進行了測量。結果表明:當硅測頭插入鐵水5s以后電動勢值即可達到穩定值;電動勢與硅量的關系符合理論公式;T=1694~1749K,電動勢隨溫度的變很小。本研究所開發的硅測頭具有響應迅速、準確,可望在現場得到應用推廣。

     

    Abstract: Laboratory EMF measurements were conducted in Fe+C(sat)+Si system using ZrO2 (MgO) solid electrolyte equipped with a new auxiliary electrode SiO2+CaF2. The results showed that the measured EMFs reaches stable value within 5 seconds after immersion of the developed silicon probe into the above melt; the relation between measured EMFs and silicon activity corresponds with the theoretical calculation; the measured EMFs were nearly independent of measured temperature from 1 694 to 1 749K. Due to the rapid response and accuracy of the silicon probe developed in this study, it is expected to be used in situ.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com