<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

低鈷易磨削超硬高速鋼Co3N系列

Low-Cobalt Superhard High Speed Steel with Fine Grindablity-Co3N Series

  • 摘要: Co對易磨削(1%V)的超硬型W-Wo和Mo系高速鋼性能影響的研究表明,隨Co含量的提高,二次硬度上升,3%-5%Co還可提高鋼的強韌性,8%Co則有明顯的脆化作用。新的低Co超硬高速鋼Co3N在硬度、紅硬性、強度、韌性和可磨削性諸方面皆達到M42的水平。

     

    Abstract: The investigation about influence of cobalt on properties of superhard W-Mo and Mo system high speed steel (HSS) containing 1% V had observed that the secondary hardness rised with the increasing of cobalt, and the strength and toughness could be increased in the range of 3%~5% Co. When cobalt content arrived to 8%, the brittleness would be appeared. A new type of superhard high speed steel, Co3N, with low cobalt content and the same hardness,red-hardness, strength, toughness and erindability of M42, was developed.

     

/

返回文章
返回
<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
<span id="fpn9h"><noframes id="fpn9h">
<th id="fpn9h"></th>
<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>
<th id="fpn9h"><noframes id="fpn9h">
<span id="fpn9h"><video id="fpn9h"></video></span>
<ruby id="fpn9h"></ruby>
<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>
www.77susu.com