混合選別過程半實物仿真系統

武成瑞; 賈瑤; 王琳巖

doi:10.13374/j.issn2095-9389.2017.09.015

混合選別過程半實物仿真系統

doi: 10.13374/j.issn2095-9389.2017.09.015

東北大學流程工業綜合自動化國家重點實驗室, 沈陽 110819

基金項目:

國家高技術研究發展計劃(863)資助項目(2015AA043802)

國家自然科學基金資助項目(61503066)

國家自然科學基金青年基金資助項目(61304091)

詳細信息

中圖分類號: TP271.6
計量
- 文章訪問數: 765
- HTML全文瀏覽量: 310
- PDF下載量: 10
- 被引次數: 0
出版歷程
- 收稿日期: 2016-11-05

A hardware-in-the-loop simulation system for the mixed separation process

State Key Laboratory of Synthetical Automation for Process Industries, Northeastern University, Shenyang 110819, China

摘要

摘要: 為了滿足復雜工業過程控制技術的研究需求,需要建立具有代表性的半實物仿真系統.針對混合選別過程,研發由對象計算機、控制器設計計算機、監控計算機、虛擬執行機構與檢測儀表裝置和控制系統組成的半實物仿真系統.該系統基于工業控制系統軟件開發控制算法,運用MATLAB研發虛擬對象、虛擬執行機構和檢測儀表、控制器設計模型,研發了相應的可視化界面.在對象計算機、控制器設計計算機和監控計算機的基礎上完成了被控對象機理建模、控制器設計模型參數辨識、控制器設計和控制器性能評價等研究.為復雜控制算法研究進一步工業應用奠定了基礎.
- 混合選別過程 /
- 半實物仿真 /
- 系統結構 /
- 運行控制 /
- 控制器設計
Abstract: A representative hardware-in-the-loop simulation system was established for the mixed separation process to meet the demands of industrial process control technologies with complex characteristics. A hardware-in-the-loop simulation system was developed composed of a virtual object computer, a controller-design computer, a monitoring computer, virtual actuators, virtual detecting instruments, and a control system to achieve mixed separation. The control algorithm of the system was based on actual industrial software, and Matlab was use to design the virtual object, virtual actuators, virtual detecting instruments, and online identification system. The mechanism modeling of controlled object, parameter identification of controller design model, controller design and controller performance evaluation were completed on the virtual object computer, controller-design computer and monitoring computer. The proposed system lays the foundation for future industrial applications of control algorithms for complex industrial processes.
- mixed separation process /
- hardware-in-the-loop simulation /
- system structure /
- operational control /
- controller design

HTML全文

參考文獻(18)

[3]	Liu Y, Spencer S. Dynamic simulation of grinding circuits. Miner Eng, 2004, 17(11-12):1189
[5]	Li H B, Chai T Y, Zhang L Y. Hybrid intelligent optimal control for flotation processes//2012 American Control Conference. Montréal, 2012:4891
[6]	Geng Z X, Chai T Y, Yue H. A method of hybrid intelligent optimal setting control for flotation process//7th World Congress on Intelligent Control&Automation. Chongqing, 2008:4713
[7]	Dai W, Zhou P, Zhao D Y, et al. Hardware-in-the-loop simulation platform for supervisory control of mineral grinding process. Powder Technol, 2016, 288:422
[9]	Radhakrishnan V R. Model based supervisory control of a ball mill grinding circuit. J Process Control, 1999, 9(3):195
[10]	Bartlett J T. Process simulation and optimization using metsim//Mineral Resources Management by Personal Computer. Littleton, 1987:105
[12]	Liu F Z, Gao H J, Qiu J B, et al. Networked multirate output feedback control for setpoints compensation and its application to rougher flotation process. IEEE T Ind Electron, 2014, 61(1):460
[13]	Chen Z M, Hu Y J, Wang X, et al. Design of hardware-in-theloop simulation system for LTE-A system based on USRP//2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA). Hefei, 2016:2081
[14]	Rajamani R K, Herbst J A. Optimal control of a ball mill grinding circuit——I. Grinding circuit modeling and dynamic simulation. Chem Eng Sci, 1991, 46(3):861
[15]	Durance M V, Guillaneau J C, Villeneuve J, et al. Computer simulation of mineral and hydrometallurgical processes, USIM PAC2, a single software from design to optimization//Proceedings of International Symposium on Modelling Simulation Control of Hydrometallurgical Processes. Quebec, 1993:109
[16]	Cecati C, Kolbusz J, Różycki P, et al. A novel RBF training algorithm for short-term electric load forecasting and comparative studies. IEEE T Ind Electron, 2015, 62(10):6519
[17]	Yu H, Xie T T, Paszczynski S, et al. Advantages of radial basis function networks for dynamic system design. IEEE T Ind Electron, 2011, 58(12):5438
[18]	Kolodner J L. An introduction to case-based reasoning. Artif Intell Rev, 1992, 6(1):3
[19]	Riesbeck C K, Schank R C. Inside Case-based Reasoning. New Jersey:Lawrence Erlbaum Associates, 2013
[20]	Zhou P, Chai T Y, Wang H. Intelligent optimal-setting control for grinding circuits of mineral processing process. IEEE Trans Autom Sci Eng, 2009, 6(4):730
[21]	Sidrak Y L. Control of the thickener operation in alumina production. Control Eng Pract, 1997, 5(10):1417
[22]	Chai T Y, Jia Y, Li H B, et al. An intelligent switching control for a mixed separation thickener process. Control Eng Pract, 2016, 57:61
[23]	Li H B, Chai T Y, Fu J, et al. Adaptive decoupling control of pulp levels in flotation cells. Asian J Control, 2013, 15(5):1434