基于漸進變分法的蛋盒型結構等效剛度分析及優化

臧勇; 王遠; 秦勤; 管奔

doi:10.13374/j.issn2095-9389.2017.09.012

基于漸進變分法的蛋盒型結構等效剛度分析及優化

doi: 10.13374/j.issn2095-9389.2017.09.012

北京科技大學機械工程學院, 北京 100083

基金項目:

中央高校基本科研業務費資助項目(FRF-TP-16-010A3)

工信部2016年智能制造綜合標準化與新模式應用項目

詳細信息

中圖分類號: TB383
計量
- 文章訪問數: 574
- HTML全文瀏覽量: 155
- PDF下載量: 7
- 被引次數: 0
出版歷程
- 收稿日期: 2017-02-22

Equivalent stiffness and optimized design of egg-box structure based on variational asymptotic method

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要

摘要: 對蛋盒型結構的等效剛度特性進行了分析并實現了蛋盒型結構參數的優化設計.首先以蛋盒型結構的單胞為研究對象,基于漸進變分法,得到了蛋盒型結構等效剛度特性的數值計算方法.隨后用該方法計算蛋盒型結構不同參數情況下的等效剛度特性,并以結構參數為自變量,等效剛度特性為因變量進行擬合.最后應用擬合公式在限定泊松比或等效剛度的情況下,分別以最大化結構的屈曲載荷和最大化單位質量吸能能力的優化為例,對蛋盒型結構參數進行了量綱為一的優化設計.計算結果表明:蛋盒型結構拉伸剛度降低,彎曲剛度升高;蛋盒型結構的剛度特性與結構參數之間呈現非線性的特點,結構表現出負泊松比的特性;在給定優化目標和限定條件時應用擬合公式可以快速實現蛋盒型結構參數的主動優化設計.
- 蛋盒型結構 /
- 漸進變分法 /
- 等效剛度 /
- 結構優化
Abstract: The equivalent stiffness of the egg-box structure was investigated to achieve structural optimization of the structure parameters. A unit cell of the egg-box structure was studied using the variational asymptotic method to obtain a numerical calculation method for equivalent stiffness of the whole egg-box structure. This numerical calculation method was then used to analyze the equivalent stiffness of the egg-box structure with different structural parameters. A formula for equivalent stiffness characteristics was then fitted, and the structural parameters were treated as independent variables. Finally, the fitted formula was used to optimize the dimensionless structural parameters to obtain maximum buckling load and maximum energy absorbed per unit weight when Poisson's ratio or equivalent stiffness was restricted. Results show that the tensile stiffness of the egg-box structure is reduced, but the bending stiffness is increased. In addition, there is a nonlinear relationship between stiffness and structural parameters, and the structure exhibits a negative Poisson's ratio. Furthermore, active parameters optimization design of the egg-box structure can be easily achieved with the fitted formula.
- egg-box structure /
- variational asymptotic method /
- equivalent stiffness /
- structural optimization

HTML全文

參考文獻(19)

[1]	Ashmead M. Energy-Absorbing Structures:US Patent, 6547280.2003-4-15
[2]	Deshpande V S, Fleck N A. Energy absorption of an egg-box material. J Mech Phys Solids, 2003, 51(1):187
[3]	Zupan M, Chen C, Fleck N A. The plastic collapse and energy absorption capacity of egg-box panels. Int J Mech Sci, 2003, 45(5):851
[4]	Akisanya A R, Fleck N A. Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading. Int J Mech Sci, 2006, 48(7):799
[5]	Chung J G, Chang S H, Sutcliffe M P F. Deformation and energy absorption of composite egg-box panels. Compos Sci Technol, 2007, 67(11-12):2342
[6]	Yoo S H, Chang S H. An experimental study on energy absorbing structures made of fabric composites. Compos Struct, 2008, 86(1-3):211
[7]	Yoo S H, Chang S H, Sutcliffe M P F. Compressive characteristics of foam-filled composite egg-box sandwich panels as energy absorbing structures. Composites Part A, 2010, 41(3):427
[8]	Nowpada S, Chirwa E C, Myler P, et al. "Egg-box" panel for commercial vehicle front-compressive loading tests. Int J Crashworthines, 2010, 15(1):59
[9]	Nowpada S, Chirwa E C, Myler P, et al. Aluminum "egg-box" panel as an energy absorber for pedestrian protection. Adv Eng Mater, 2010, 12(7):591
[10]	Sashikumar S, Chirwa E C, Myler P, et al. Numerical investigation into the collapse behaviour of an aluminium egg-box under quasi-static loading. Int J Crashworthines, 2012, 17(6):582
[11]	Javid F, Smith-Roberge E, Innes M C, et al. Dimpled elastic sheets:a new class of non-porous negative Poisson's ratio materials. Sci Rep-UK, 2015, 5:18373
[12]	Xia Y Y, Friswell M I. Equivalent models of corrugated laminates for morphing skins//Proceedings of the Active and Passive Smart Structures and Integrated Systems V. San Diego, 2011:79771I-1
[13]	Xia Y, Friswell M I, Flores E I S. Equivalent models of corrugated panels. Int J Solids Struct, 2012, 49(13):1453
[14]	Briassoulis D. Equivalent orthotropic properties of corrugated sheets. Comput Struct, 1986, 23(2):129
[15]	Peng L X, Liew K M, Kitipornchai S. Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method. Int J Mech Sci, 2007, 49(3):364
[16]	Ye Z, Berdichevsky V L, Yu W B. An equivalent classical plate model of corrugated structures. Int J Solids Struct, 2014, 51(11-12):2073
[17]	Berdichevsky V. Variational Principles of Continuum Mechanics:Ⅱ. Applications. Berlin:Springer Science&Business Media, 2009
[18]	Ye Z. Enhance Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH) for Real Engineering Structures and Materials[Dissertation]. Logan Utah:Utah State University, 2013
[19]	Yu W B, Tang T. Variational asymptotic method for unit cell homogenization of periodically heterogeneous materials. Int J Solids Struct, 2007, 44(11-12):3738