噴射沉積H13鋼的組織和硬度

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

噴射沉積H13鋼的組織和硬度

黃進峰, 蔡玉麗, 于一鵬, 崔華, 張濟山

文章導航 > 工程科學學報 > 2011 > 33(1): 28-32

黃進峰, 蔡玉麗, 于一鵬, 崔華, 張濟山. 噴射沉積H13鋼的組織和硬度[J]. 工程科學學報, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

引用本文:

黃進峰, 蔡玉麗, 于一鵬, 崔華, 張濟山. 噴射沉積H13鋼的組織和硬度[J]. 工程科學學報, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

HUANG Jin-feng, CAI Yu-li, YU Yi-peng, CUI Hua, ZHANG Ji-shan. Microstructure and hardness of spray-formed H13 steel[J]. Chinese Journal of Engineering, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

Citation:

HUANG Jin-feng, CAI Yu-li, YU Yi-peng, CUI Hua, ZHANG Ji-shan. Microstructure and hardness of spray-formed H13 steel[J]. Chinese Journal of Engineering, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

黃進峰, 蔡玉麗, 于一鵬, 崔華, 張濟山. 噴射沉積H13鋼的組織和硬度[J]. 工程科學學報, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

引用本文:

黃進峰, 蔡玉麗, 于一鵬, 崔華, 張濟山. 噴射沉積H13鋼的組織和硬度[J]. 工程科學學報, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

HUANG Jin-feng, CAI Yu-li, YU Yi-peng, CUI Hua, ZHANG Ji-shan. Microstructure and hardness of spray-formed H13 steel[J]. Chinese Journal of Engineering, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

Citation:

HUANG Jin-feng, CAI Yu-li, YU Yi-peng, CUI Hua, ZHANG Ji-shan. Microstructure and hardness of spray-formed H13 steel[J]. Chinese Journal of Engineering, 2011, 33(1): 28-32. doi: 10.13374/j.issn1001-053x.2011.01.005

噴射沉積H13鋼的組織和硬度

doi: 10.13374/j.issn1001-053x.2011.01.005

1. 北京科技大學新金屬材料國家重點實驗室, 北京 100083;
2. 北京科技大學材料科學與工程學院, 北京 100083

基金項目:

國家高技術研究發展計劃資助項目(No.2007AA03Z502)

通訊作者:
黃進峰,E-mail:huang-j-f@263.net

中圖分類號: TG142.1
計量
- 文章訪問數: 234
- HTML全文瀏覽量: 95
- PDF下載量: 3
- 被引次數: 0
出版歷程
- 收稿日期: 2009-11-24

Microstructure and hardness of spray-formed H13 steel

1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;
2. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要: 用傳統鑄造和噴射成形工藝制備了H13鋼,然后再進行鍛造加工,利用光學金相顯微鏡(OM)、掃描電子顯微鏡(SEM)、X射線衍射分析(XRD)等分析方法及硬度測試對不同工藝制備的H13鋼的顯微組織和硬度進行分析.研究結果表明,噴射成形及其鍛造加工的H13鋼的組織及硬度明顯的優于傳統工藝制備的H13鋼.
- 模具鋼 /
- 噴射成形 /
- 顯微組織 /
- 硬度
Abstract: H13 steel was prepared by traditional processes and spray forming respectively, then it was subjected to forging processes. The miorostructure and hardness of H13 steel prepared by different processes were studied by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and hardness tester. The results show that the spray formed and forged H13 steel possesses a finer grain size and a higher hardness than traditional H13 steel.
- die steel /
- spray forming /
- microstructure /
- hardness

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 234
HTML全文瀏覽量: 95
PDF下載量: 3
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>