斜軋擴管孔型開度及頂頭平整段錐角分析

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

斜軋擴管孔型開度及頂頭平整段錐角分析

于浩, 呂慶功, 黃秋群, 李群, 史建偉, 李東

文章導航 > 工程科學學報 > 2010 > 32(1): 112-117

于浩, 呂慶功, 黃秋群, 李群, 史建偉, 李東. 斜軋擴管孔型開度及頂頭平整段錐角分析[J]. 工程科學學報, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

引用本文:

于浩, 呂慶功, 黃秋群, 李群, 史建偉, 李東. 斜軋擴管孔型開度及頂頭平整段錐角分析[J]. 工程科學學報, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

YU Hao, Lü Qing-gong, HUANG Qiu-qun, LI Qun, SHI Jian-wei, LI Dong. Analysis on the opening of pass in rotary tube expanding mills and the cone angle in the smoothing zone of plugs[J]. Chinese Journal of Engineering, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

Citation:

YU Hao, Lü Qing-gong, HUANG Qiu-qun, LI Qun, SHI Jian-wei, LI Dong. Analysis on the opening of pass in rotary tube expanding mills and the cone angle in the smoothing zone of plugs[J]. Chinese Journal of Engineering, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

于浩, 呂慶功, 黃秋群, 李群, 史建偉, 李東. 斜軋擴管孔型開度及頂頭平整段錐角分析[J]. 工程科學學報, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

引用本文:

于浩, 呂慶功, 黃秋群, 李群, 史建偉, 李東. 斜軋擴管孔型開度及頂頭平整段錐角分析[J]. 工程科學學報, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

YU Hao, Lü Qing-gong, HUANG Qiu-qun, LI Qun, SHI Jian-wei, LI Dong. Analysis on the opening of pass in rotary tube expanding mills and the cone angle in the smoothing zone of plugs[J]. Chinese Journal of Engineering, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

Citation:

YU Hao, Lü Qing-gong, HUANG Qiu-qun, LI Qun, SHI Jian-wei, LI Dong. Analysis on the opening of pass in rotary tube expanding mills and the cone angle in the smoothing zone of plugs[J]. Chinese Journal of Engineering, 2010, 32(1): 112-117. doi: 10.13374/j.issn1001-053x.2010.01.001

斜軋擴管孔型開度及頂頭平整段錐角分析

doi: 10.13374/j.issn1001-053x.2010.01.001

1. 北京科技大學材料科學與工程學院, 北京 100083;
2. 北京科大中冶技術發展有限公司, 北京 100029;
3. 天津鋼管集團股份有限公司, 天津 300301

作者簡介:
于浩(1970-),男,教授,E-mail:yhzhmr@sina.com

中圖分類號: TG333
計量
- 文章訪問數: 244
- HTML全文瀏覽量: 85
- PDF下載量: 4
- 被引次數: 0
出版歷程
- 收稿日期: 2009-05-13

Analysis on the opening of pass in rotary tube expanding mills and the cone angle in the smoothing zone of plugs

1. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Beijing Branch Large and Medium-sized Metallurgical Technology Development Co. Ltd., Beijing 100029, China;
3. Tianjin Pipe Group Co. Ltd., Tianjin 300301, China

摘要: 基于斜軋擴管機特殊的空間結構,采用條件極值法確定軋輥輥面孔徑點位置,解析出孔徑點的空間坐標,據此建立斜軋擴管變形區的孔型開度計算模型.在此基礎上求解出與軋輥孔型開度配套頂頭的平整段錐角.結果表明,利用斜軋擴管機頂頭平整段錐角計算方法獲得的理論數值與實際生產工具參數相符合.
- 擴管 /
- 開度 /
- 頂頭 /
- 錐角 /
- 極值法
Abstract: Based on the special spatial structure of a rotary tube expanding mill,a conditional extremum method was used to determine the position of aperture points on the roller surface,to resolve the space coordinates of aperture points,and to construct a model for calculating the opening of holes in the formation zone of rotary tube expanding.The cone angle in the smoothing zone of plugs suitable for the opening of pass was calculated with the model.The calculation results are in agreement with the actual parameters of production.
- tube expanding /
- opening /
- plug /
- cone angle /
- extreme value method

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 244
HTML全文瀏覽量: 85
PDF下載量: 4
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>