CrNiMoV鋼電渣重熔過程中鎂的控制

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

CrNiMoV鋼電渣重熔過程中鎂的控制

王安仁, 于月光, 傅杰

文章導航 > 工程科學學報 > 1997 > 19(2): 134-137

王安仁, 于月光, 傅杰. CrNiMoV鋼電渣重熔過程中鎂的控制[J]. 工程科學學報, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

引用本文:

王安仁, 于月光, 傅杰. CrNiMoV鋼電渣重熔過程中鎂的控制[J]. 工程科學學報, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

Wang Anren, Yu Yueguang, Fu Jie. Control of Magnesium Content in CrNiMoV Steel during the ESR Process[J]. Chinese Journal of Engineering, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

Citation:

Wang Anren, Yu Yueguang, Fu Jie. Control of Magnesium Content in CrNiMoV Steel during the ESR Process[J]. Chinese Journal of Engineering, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

王安仁, 于月光, 傅杰. CrNiMoV鋼電渣重熔過程中鎂的控制[J]. 工程科學學報, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

引用本文:

王安仁, 于月光, 傅杰. CrNiMoV鋼電渣重熔過程中鎂的控制[J]. 工程科學學報, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

Wang Anren, Yu Yueguang, Fu Jie. Control of Magnesium Content in CrNiMoV Steel during the ESR Process[J]. Chinese Journal of Engineering, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

Citation:

Wang Anren, Yu Yueguang, Fu Jie. Control of Magnesium Content in CrNiMoV Steel during the ESR Process[J]. Chinese Journal of Engineering, 1997, 19(2): 134-137. doi: 10.13374/j.issn1001-053x.1997.02.003

CrNiMoV鋼電渣重熔過程中鎂的控制

doi: 10.13374/j.issn1001-053x.1997.02.003

北京科技大學冶金學院, 北京 100083

作者簡介:
王安仁男 33歲講師碩士

中圖分類號: TF14
計量
- 文章訪問數: 248
- HTML全文瀏覽量: 78
- PDF下載量: 9
- 被引次數: 0
出版歷程
- 收稿日期: 1996-08-21
- 網絡出版日期: 2021-08-27

Control of Magnesium Content in CrNiMoV Steel during the ESR Process

Metallurgy School, UST Beijing, Beijing 100083, China

摘要: 研究了電渣重熔過程中CrNiMoV鋼中鎂含量的控制技術.結果表明：最佳的渣系（質量分數）為62%CaF₂-10%Al₂O₃－12%CaO-16%MgO;脫氧劑加入量為1kg鋼加入1.5gCasi;采用較高鎂含量的電極和較高的重熔電流有助于獲得設計鎂含量的重熔錠.
- 電渣重熔 /
- 控制 /
- CrNiMoV鋼 /
- 鎂
Abstract: A control technology of magnesium content in CrNiMoV steel during ESR process has been studied. The experimental results show that the optimum slag (mass frictom) constitution is 62%CaF₂-10%Al₂O₃-12%CaO-16 %MgO and the amount of deoxidiser added is 1. 5g CaSi per kilogram of liquid steel. The higher magnesium content of electrode and higher remelting current is beneficial for obtaining remelting ingots with predicted magnesium content.
- ESR /
- magnesium /
- control /

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 248
HTML全文瀏覽量: 78
PDF下載量: 9
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>