鎳基噴焊層的等離子弧重熔試驗研究

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

鎳基噴焊層的等離子弧重熔試驗研究

文章導航 > 工程科學學報 > 1996 > 18(S2): 32-36

嚴密. 鎳基噴焊層的等離子弧重熔試驗研究[J]. 工程科學學報, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

引用本文:

嚴密. 鎳基噴焊層的等離子弧重熔試驗研究[J]. 工程科學學報, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

Citation:

Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

嚴密. 鎳基噴焊層的等離子弧重熔試驗研究[J]. 工程科學學報, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

引用本文:

嚴密. 鎳基噴焊層的等離子弧重熔試驗研究[J]. 工程科學學報, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

Citation:

Yan Mi. Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding[J]. Chinese Journal of Engineering, 1996, 18(S2): 32-36. doi: 10.13374/j.issn1001-053x.1996.s2.007

鎳基噴焊層的等離子弧重熔試驗研究

doi: 10.13374/j.issn1001-053x.1996.s2.007

嚴密

浙江大學材料科學與工程系, 杭州 310027

基金項目:

國家自然科學基金及冶金部腐蝕-磨石與表面技術開放研究實驗室資助

作者簡介:
嚴密男教授

中圖分類號: TG456.2
計量
- 文章訪問數: 234
- HTML全文瀏覽量: 69
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 1996-01-22
- 網絡出版日期: 2021-11-13

Experimental Study on the Plasma-Arc Remelting Treatment of Ni-Based PTAW Cladding

Yan Mi

Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, PRC

摘要: 以等離子弧為熱源,采用類似激光表面改性的辦法,研究了重熔處理對Ni基自熔合金組織和耐磨性的影響。經等離子弧掃描重熔,噴焊層表面形成重熔激冷層,該層基體組織由γ-Ni轉變為化合物Cr_0.7Fe_0.36Ni_2.90,并形成晶粒度很小的微晶組織。重熔后試樣的耐磨粒磨損與粘著磨損性能提高,且880W重熔較440W重熔試樣的耐磨粒磨損性能提高程度更大。
- 等離子弧 /
- 重熔 /
- 表面
Abstract: The effect of plasma arc remelting treatment on the microstructure and wear resistance of overlay is investigated and discussed.With plasma are remelting process, a remelting-chilling layer formed on the overlay surface.In the layer,the matrix structure transormed from γ-Ni to Cr_0.7Fe_0.36Ni_2.90,and fine crystallite grains were obtained. Both abrasive and adhesive wear resistance were maised by plasma the remelting process.
- plasma arc /
- remelting /
- overlay

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 234
HTML全文瀏覽量: 69
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>