硅、錳和軋制工藝對雙相鋼組織與性能的影響

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

硅、錳和軋制工藝對雙相鋼組織與性能的影響

張國珍, 田琮, 吳建英, 王國斌, 王一德

文章導航 > 工程科學學報 > 1994 > 16(2): 148-153

張國珍, 田琮, 吳建英, 王國斌, 王一德. 硅、錳和軋制工藝對雙相鋼組織與性能的影響[J]. 工程科學學報, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

引用本文:

張國珍, 田琮, 吳建英, 王國斌, 王一德. 硅、錳和軋制工藝對雙相鋼組織與性能的影響[J]. 工程科學學報, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

Zhang Guozhen, Tian Cong, Wu Jianying, Wang Guobin, Wang Yide. The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels[J]. Chinese Journal of Engineering, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

Citation:

Zhang Guozhen, Tian Cong, Wu Jianying, Wang Guobin, Wang Yide. The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels[J]. Chinese Journal of Engineering, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

張國珍, 田琮, 吳建英, 王國斌, 王一德. 硅、錳和軋制工藝對雙相鋼組織與性能的影響[J]. 工程科學學報, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

引用本文:

張國珍, 田琮, 吳建英, 王國斌, 王一德. 硅、錳和軋制工藝對雙相鋼組織與性能的影響[J]. 工程科學學報, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

Zhang Guozhen, Tian Cong, Wu Jianying, Wang Guobin, Wang Yide. The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels[J]. Chinese Journal of Engineering, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

Citation:

Zhang Guozhen, Tian Cong, Wu Jianying, Wang Guobin, Wang Yide. The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels[J]. Chinese Journal of Engineering, 1994, 16(2): 148-153. doi: 10.13374/j.issn1001-053x.1994.02.011

硅、錳和軋制工藝對雙相鋼組織與性能的影響

doi: 10.13374/j.issn1001-053x.1994.02.011

1. 北京科技大學材料科學與工程系, 北京 100083;
2. 太原鋼鐵公司

作者簡介:
張國珍女 24歲碩士

中圖分類號: TG111.5
計量
- 文章訪問數: 221
- HTML全文瀏覽量: 83
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 1993-03-20
- 網絡出版日期: 2021-11-13

The Effects of Si, Mn and Rolling Processing on Microstructure and Property of As-Hot-Rolled Non-Stamping Dual-Phase Steels

1. Department of Materials Science and Engineering USTB, Beijing 100083, PRC;
2. Tai Yuan Iron and steel Company

摘要: 利用Gleeble-1500熱模擬試驗機對試驗鋼進行了模擬熱軋.研究了合金元素硅、錳和終軋溫度、軋后冷速和軋制變形對試驗鋼雙相組織形成和性能的影響.結果表明:在試驗工藝參數范圍內,試驗鋼均獲得雙相組織,其穩定性較好.導出了估算熱軋空冷Si-Mn雙相鋼的f_M和f_{F_p}值的計算式,計算值和實測值吻合.熱軋參數對試驗鋼硬度的影響較小.
- 熱軋-雙相鋼 /
- 硅 /
- 錳/熱軋態雙相鋼 /
- 熱模擬試驗
Abstract: The experimental steels were hot-rolled by Gleeble-1500 hot-simulated testing machine, The effects of Si,Mn, final rolling temperature, after-rolled cooling rate and rolling deformation on the formation of dual-phase microstructure and property of experimental steels were studied.As a result, the experimental steels have good stability of formation of dual-phase microstructure within the range of experimental hot-rolling parameters, then the properties are also stable.
- hot-rolling-two-phase steels /
- silicon /
- manganese/as-hot-rolled dual-phase steels /
- hot-simulated test

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 221
HTML全文瀏覽量: 83
PDF下載量: 5
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回

<span id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>

<span id="fpn9h"><noframes id="fpn9h">

<th id="fpn9h"></th>

<strike id="fpn9h"><noframes id="fpn9h"><strike id="fpn9h"></strike>

<th id="fpn9h"><noframes id="fpn9h">

<span id="fpn9h"><video id="fpn9h"></video></span>

<ruby id="fpn9h"></ruby>

<strike id="fpn9h"><noframes id="fpn9h"><span id="fpn9h"></span>