Roll Contour Design of 4-high Mill with Variable Crown by Axial Shifting

Zhang Jie; Chen Xianlin; Xu Yaohuan; Zhang Yong

doi:10.13374/j.issn1001-053x.1994.s2.021

Volume 16 Issue S2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(S2): 98-101

Zhang Jie, Chen Xianlin, Xu Yaohuan, Zhang Yong. Roll Contour Design of 4-high Mill with Variable Crown by Axial Shifting[J]. Chinese Journal of Engineering, 1994, 16(S2): 98-101. doi: 10.13374/j.issn1001-053x.1994.s2.021

Citation:

Zhang Jie, Chen Xianlin, Xu Yaohuan, Zhang Yong. Roll Contour Design of 4-high Mill with Variable Crown by Axial Shifting[J]. Chinese Journal of Engineering, 1994, 16(S2): 98-101. doi: 10.13374/j.issn1001-053x.1994.s2.021

Citation:

PDF( 333 KB)

Roll Contour Design of 4-high Mill with Variable Crown by Axial Shifting

doi: 10.13374/j.issn1001-053x.1994.s2.021

1. Mechanical Engineering College. USTB. Beijing 100083. PRC;
2. Shanghai Baoshan Iron&Steel Complex. Shanghai 200941, PRC

Received Date: 1994-03-01
Available Online: 2021-11-13

Abstract

Abstract

The gap crown between two work rolls of plate mills and the strip shape can be adjusted by axial shifting of the work rolls, both of them have a special contour. By the research on the function of the work roll contour. especially on the 3 power series function and the CVC roll contour function. a way to determine the contour parameters was found.The difference between CVC & UPC work rolls and the application of them was discussed.
- plate mills,
- roll contour,
- strip shape/axial shifting